Milwaukee Furnace Repair

Furnace Repair and proper maintenance can save you from needing a Furnace Replacement in the near future. Milwaukee has 4 seasons.  It is important to make sure that your Furnace is working properly all year round.

Heating systems are usually trouble-free and easy to maintain. Efficient operation is a function of good regular maintenance. No matter what type of furnace you have, there are several things you can do to keep your heating system in top condition. In this article, we will tell you how to service and troubleshoot your furnace, regardless of the type.
When a heating or cooling system malfunctions, any one of its three components -- heat/cold source, distribution system, or thermostat -- may be causing the problem. If the furnace or air conditioner doesn't run, the malfunction is probably at the source. The furnace or air conditioner may have lost power. Fuel may not be reaching the unit. If the fuel is gas or oil, it may not be igniting. If the furnace or air conditioner turns on but the warm or cool air isn't reaching the rooms of your home, the problem is likely to be the blower or distribution system. And a faulty control, or thermostat, could keep the system from turning on or could cause it to turn on and off repeatedly. Whatever the problem, start with the simplest procedures. In most cases, all it takes is patience and common sense.
Before you start work on a heating or cooling system, take these preliminary steps:

• Make sure the unit is receiving power. Look for blown fuses or tripped circuit breakers at the main entrance panel. Some furnaces have a separate power entrance, usually located at a different panel near the main entrance panel. Some furnaces have fuses mounted in or on the unit.
• If the unit has a reset button, marked RESET and near the motor housing, wait 30 minutes to let the motor cool, then press the button. If the unit still doesn't start, wait 30 minutes and press the reset button again. Repeat at least once more.
• If the unit has a separate power switch, make sure the switch is turned on.
• Check to make sure the thermostat is properly set. If necessary, raise (or, for an air conditioner, lower) the setting 5º.
• If the unit uses gas, check to make sure the gas supply is turned on and the pilot light is lit. If it uses oil, check to make sure there is an adequate supply of oil.

There are also several important safety factors to remember:

• Before doing any work on any type of heating or cooling system, make sure all power to the system is turned off. At the main electrical entrance panel, trip the circuit breaker or remove the fuse that controls the power to the unit. If you're not sure which circuit the system is on, remove the main fuse or trip the main circuit breaker to cut off all power to the house. Some furnaces have a separate power entrance, usually at a different panel near the main entrance panel. If a separate panel is present, remove the fuse or trip the breaker there.
• If the fuse blows or the circuit trips repeatedly when the furnace or air conditioner turns on, there is a problem in the electrical system. In this case, do not try to fix the furnace. Call a professional service person.
• If the unit uses gas and there is a smell of gas in your home, do not try to shut off the gas or turn any lights on or off. Get out of the house, leaving the door open, and immediately call the gas company or the fire department to report a leak. Do not reenter your home.
• To keep your heating and cooling systems in top shape, have them professionally serviced once a year. The best time to have a furnace serviced is at the end of the heating season. Because this is the off-season, you can often get a discount, and service is likely to be prompt. Have your air conditioner checked at the same time.

The heat/cold source is the most complicated part of the heating and cooling system, and it's the part most likely to suffer from neglect. Problems in this area may also lead to distribution problems. Whatever heat/cold source your system uses, give it regular attention to prevent problems.
Dirt is the biggest enemy of your home's heating and cooling system. It can waste fuel and drastically lower efficiency. Dirt affects all three basic components of the system, so cleaning is the most important part of regular maintenance. Lubrication and belt adjustment at the furnace are also important.
Click here to continue

Brookfield Wi Furnace Repair | Heating Contractor Gregg Heating

Keeping your Brookfield Wi home warm during the winter keeps you and your family comfortable, as being in cold temperature areas like Milwaukee makes you susceptible to health problems. When your heating system stops working, you need professional home heating repair services quickly.

Home heating systems are complex, Professional technicians are trained to troubleshoot and repair a variety of home heating systems. Knowing when to call us can help keep your repair and utility costs more manageable. If you smell natural gas in your home, you and your family need to leave the house immediately and contact the fire department or gas company.

You may notice other signs that your home heating system needs our repair services. Like:

* Your furnace turns on, but only blows cold air
* Your furnace does not provide enough heat to your home
* Your furnace frequently turns on and off
* You hear the blower of the furnace running, but no air is coming out of the registers
* The blower continues to run after the furnace turns off
* Your home has uneven heating
* You hear rattling around your furnace
* You have a large amount of dust and pollen in your home
* You have unusually high utility bills

If you have one of these problems with your home heating system, or if you notice other signs that your heating system is not operating efficiently, call  to schedule an appointment. Professional technicians will conduct a thorough evaluation of your home heating system, and let you know of any necessary repairs.
For most inspections, the evaluation includes an inspection of the draft inducer fan, ignitor, gas valve, burner, heat exchanger, furnace blower, cold-air return, filters and ducts. The draft inducer fan is a component of most high-efficiency home heating systems. The ignitor, gas valve, burner and heat exchanger work together to heat the air, which is then moved to the furnace blower. The furnace blower performs two operations – pulling in cool air and pushing out warm air. The furnace blower pulls cool air from the cold-air returns, and, after the air is heated, pushes it back out into the home. Before the cool air is heated, a furnace filter cleans the air of any dust, smoke and allergens.

Some of the most common types of home heating systems are forced air or hot water systems. Regardless of the type of system you have in your home, our service technicians are trained to repair your system. In some cases, such as when units that are more than seven years old, your unit may need replacement. In the event that your home heating repairs become too costly, we can help you choose an economical, high-efficiency system that will help you save on your future utility costs, and provide your family with reliable heating throughout the winter.

Furnace Repair Brookfield Wi

Common Easy Fix Heating Problems I Find In Brookfield WI

Make sure thermostat is in the heating position and it is turned up above room temperature.

Make sure filter is clean.

Make sure on/off switch on the side of the furnace is in the on position. Also, check circuit breaker.

Make sure drain hose is unrestricted, if you have a +90% furnace.

Make sure the white outside vent pipes are unrestricted, if you have a +90% furnace.

Make sure the bottom cover of the furnace is on securely (blower access panel).

If the above fails to solve problem, call for service.